Check Weighing; Accumulated Total - Uline H-1649 Manual De Instrucciones

PARTS COUNTING CONTINUED
5. Press the ZERO/ENTER key
number matches the number of items used in the
sample. As more weight is added, the display shows
the number of pieces (
%
%
6. Press the key
total weight ( ) or the count (
k g
7. Press the FUNC key
NOTE: See uline.com for a parts counting
instructional video.

CHECK WEIGHING

Check weighing sounds an alarm when the weight on the
scale exceeds limits stored in the memory. High and low
limits can be set and can be used individually or together.
Setting the High Limit:
1. Press the LIMIT key
high limit. left most number is flashing and the
icon is on.
2. To change the high limit, press the
Limit
LIMIT/> keys to select which number to change.
3. Press the TARE/^key
number.
4. Press ZERO/ENTER key
5. If you need to reset the number to zero, press the
FUNC/C key.
Func
Setting the Low Limit:
1. After pressing ZERO/ENTER key
shows the low limit,
2. To change the low limit, press the
LIMIT/> to select which number to change.
Limit
3. Press the TARE/^key
number.
4. Press ZERO/ENTER key
5. If you need to reset the number to zero, press the
FUNC/C key .
Func
6. After pressing the ZERO/ENTER key
returns to weighing mode with the check-weighing
function turned on.
7. When a weight is placed on the scale, arrows
indicate if the weight is over or under the limits and
a beeper sounds.
PAGE 4 OF 27
OPERATION CONTINUED
Zero
when the displayed
).
pcs
to display the unit weight (
).
pcs
to return to weighing mode.
Func
Limit
. Display shows the current
%
%
/<
to change the flashing
Tare
to set the number.
Zero
Zero
, display then
will be on (left side of display).
LO
%
/< %
to change the flashing
Tare
Zero
to set the number.
Zero
, the scale
Both Limits Set:
• The display shows
the limits.
Low Limit Set, High Limit Set to Zero:
• Display shows
Shows
),
g/pcs
High Limit Set, Low Limit Set to Zero:
• Display shows
limit. Above the high limit display shows
Both Limits Set, Low is Set Greater than High:
• The beeper will never sound and display shows
if the weight is less than the
if the weight is greater than the
HI
NOTE: The weight must be greater than 20
scale divisions for check weighing to operate.
To Disable Check Weighing:
1. Press the LIMIT key
HI
2. Press the FUNC/C key
and the
limits when the current limits are shown, then press
the ZERO/ENTER key

ACCUMULATED TOTAL

Scale can be set to accumulate automatically or
manually.
To set automatic or manual accumulation:
1. Press FUNC
2. Press LIMIT/> key
AU ON
3. AU ON
and the
4. AU OFF
accumulation.
5. Press TARE/^ key
and
AU OFF
6. Press ZERO/ENTER key
7. Press FUNC key
NOTE: Even when the scale is set to display
grams or ounces, the accumulate function
still keeps weight in kilograms or pounds.
when the weight is within
OK
when weight is under the limit.
OK
when above the Low Limit.
HI
when weight is less than the high
LO
LO
to display current limits.
Limit
Func
to enter zero into both
to store the zero values.
Zero
and ACC
Func
Acc
Limit
to scroll through options until
or is displayed.
AU OFF
means automatic accumulation is on.
means scale is set for manual
to toggle between
Tare
.
to set your selection.
Zero
to exit.
Func
.
OK
LO
limit. Display shows
Limit.
LO
keys simultaneously.
AU ON
0621 IH-1649