Door Panels; Before You Begin - GE 16D3941P006 Manual Del Propietário

Adding door panels.
On models with a trim kit.
Read these instructions completely and carefully.

Before You Begin

These instructions describe how to insert decorator panels and what size the panels should be.
Panels Should Be Cut to the Following Dimensions:
Top freezer panel—14
Bottom freezer panel—14
Fresh food panel—20
Panels that are 1/4² (6 mm) thick will fit the door frame trim with no special preparation. If you have a
material thinner than 1/4² (6 mm), you will need to add a filler behind the panel for proper fit.
Pre-cut white and black panels are available from your dealer.
14
/ ² x 18 / ² (36.4 cm x 47.6 cm)
5 3
16 4
/ ² x 32 / ² (36.4 cm x 82.2 cm)
5 3
16 8
/ ² x 65 / ² (51.0 cm x 165.6 cm)
1 3
16 16
/
14 5
Special cut-
16
out required, 36.4 cm
see below.
/ ²
18 3
4
47.6 cm
/ ²
32
3
8
82.2 cm
/
14 5
16
36.4 cm
A cut-out is required at these outer corners,
5/16² (8 mm) long, 1/8² (3 mm) deep.
² / ²
20 1
Special cut-
16
51.0 cm out required,
see below.
/
65 3
165.6 cm
²
1/8²
3 mm
5/16²
8 mm
²
16