Uline H-1993 Manual De Instrucciones página 3

REPLACING THE DRIVER BLADE/ANVILS
TO REPLACE THE DRIVER BLADE:
1. Remove six screws
holding the rear
body to the front
section. (See Figure 10)
2. Remove the rear
body with magazine.
3. Replace the driver
blade. (See Figure 11)
4. Assemble parts in
reverse order.
PAGE 3 OF 9
MAINTENANCE CONTINUED
Figure 10
Rear Body
Screw
1-800-295-5510
NOTE: If changing the anvils, always change
both at the same time.
TO REPLACE THE ANVILS:
1. Remove the driver
blade. (See Figure 11)
2. Remove the screws.
3. Replace the anvils.
4. Assemble parts in
reverse order.
uline.com
Figure 11
Screw
Anvils
Screw
Driver
Blade
0421 IH-1993