Tripp-Lite BP Serie El Manual Del Propietario página 7

Mounting (2-Post Rack or Tower)
BP24V15RT2U 2-Post Mounting
To install the BP24V15RT2U external battery pack in a 2-post rack, remove the
mounting hole covers from the top and bottom sides of the pack
mounting ears to each side of the UPS using the included hardware
an assistant, lift the battery pack and attach it to a standard rack with user-supplied
hardware 3 .
1
3
Important: Illustrations show the most common installation
configurations; your model may vary. Use only the pre-drilled screw
holes to attach mounting brackets to the sides of the battery pack.
When installing battery packs into the rack, ensure the weight of the
unit is evenly distributed.
17-05-246-932487.indb 7
2
7
1 . Attach the
2 . With the help of
5/31/2017 4:32:40 PM