Battery Recharge - CompeGPS TwoNov Aventura Guía De Inicio Rápida

•
Stop Simulation: It stops the ongoing simulation (both from A-B spots, as
from any track being animated).
•
3D Panorama: This option shows an aerial view of the surroundings. In
order to do it, Mode 3D must be activated.
3 Start up and maintenance
3.1 'Turn on' and 'Hold'
Keep the ON key pressed for 2 seconds to start the system. Carry out the same opera-
tion for turning it off.
When the device is on, you may use the key 'hold' to block the device on two levels:
•
Keypad block: With one brief press on the 'HOLD' key, the keypad and the
screen are blocked, making the use of the device impossible, but leaving
the screen on. Repeat a brief pressure to unblock.
• Complete blocking: By pressing for 2 seconds on the 'HOLD' key, the
keypad will become blocked and the screen won't just be blocked, but also
will be turned off. Consequently, the information will not be visible, but the
battery energy will be saved. Press longer once more to unblock.
3.2

Battery Recharge

The TwoNav Aventura Li-on battery is recharged via the USB port. It is normally fit-
ted with 3 power sources:
•
PC: When connecting the device to a computer, besides allowing you to
manage the data present in the memory from the PC, the battery is also
charged. The charging speed will be considerably lower to the other two
charging systems (about 12 hours for a complete charge).
•
Charger for car lighter: Included in the TwoNav Aventura kit. If it is
charged with the device turned off, it will take from 4 to 5 hours for a com-
plete charge. If navigation is being carried out, it will take longer.
• AC/DC charger: Not included in the series. It can be purchased sepa-
rately or use any other USB charger. A 1000mA/h charger will take about 4
or 5 hours for a complete charge.
You can operate normally while the TwoNav is connected to the power source, except
if it is connected to a PC, when the device will only operate as a massive storage unit.
7