Zbm Battery Voltage Hazard; Zbm Fire Safety Characteristics - Redflow ZBM Guia De Inicio Rapido

4.7.

ZBM Battery Voltage Hazard

A single ZBM can have between 0V and 57V DC on the battery terminals during operation. The voltage across
the battery terminals will be 0V when it is fully discharged and it is not connected to any other power source.
While the ZBM should be fully discharged (terminal voltage at 0V) during transportation or storage, care
should be taken in case the terminals are live.
Depending on the application, several ZBMs may be connected together in series
generating higher and more dangerous DC voltages. Therefore, only qualified
personnel should operate the ZBM with appropriate safety measures in place to
avoid harm to others and themselves. This should include clear signage of unsafe
voltages, and the presence of high-voltage safety and resuscitation equipment, as
4.8.

ZBM Fire Safety Characteristics

The ZBM is an inherently low fire risk battery as its electrolyte is non-flammable and has many characteristics
of a fire retardant (see the SDS in the ZBM Installation and Operation Manual.
well as low-voltage training for key personnel.
10