PARTS:
Remove fixture and mounting package from box and make sure that parts are not missing
by referencing illustrations below. (Parts are not to scale.)
CAUTION:
•
All electrical connections must be in accordance with local and National Electrical Code
(N.E.C.) standards. If you are unfamiliar with proper electrical practices, obtain services
of a qualified electrician.
•
Turn off the main power at circuit breaker before installing fixture, in order to prevent
possible shock.
BEFORE YOU BEGIN:
•
NOTE: This product is not for use with rectangular junction boxes.
•
The outlet box [O] described in the following section is not provided. To install this
fixture, a standard outlet box [O] needs to be pre-installed in the wall at the desired
location. Power supply wires need to be run to the outlet box [O] providing 120 VAC of
power. If an outlet box [O] does not exist, contact a qualified electrician to have one
installed.
[A] Fixture (1)
[B] Lock Nuts (2)
[C] Wire Nuts (3)
[D] Mounting Bracket (1)
3
[E] Hex Nuts (2)
[F] Mounting
Screws (2)
[G] Fixture
Screws (2)