Before You Begin - Altair AL-2163 Manual De Instrucciones

PARTS:
Remove fixture and mounting package from box and make sure that parts are not missing
by referencing illustrations below. (Parts are not to scale.)
Decorative
Fixture (1)
CAUTION:
•
All electrical connections must be in accordance with local and National Electrical Code
(N.E.C.) standards. If you are unfamiliar with proper electrical practices, obtain services
of a qualified electrician.
•
Turn off the main power at circuit breaker before installing fixture, in order to prevent
possible shock.

BEFORE YOU BEGIN:

•
The outlet box described in the following section is not provided. To install this fixture, a
standard outlet box needs to be pre-installed in the wall at the desired location. Power
supply wires need to be run to the outlet box providing 120 VAC of power. If an outlet
box does not exist, contact a qualified electrician to have one installed.
Arm (1)
Top Cap (1)
Bottom Cap (1)
Mounting Bracket (1)
Hex Nuts (2)
Wire Nuts (3)
3
Decorative Nut (1)
Arm Screw (1)
Bracket Mounting
Screws (2)
Fixture Mounting
Screws (2)
Lock Nuts (2)