Operating The Test Kit - Parker ServiceJunior Test-Kit Manual Del Usuario

Operating the Test Kit

Ä The test kit is ready to operate.
5. Operating the Test Kit
CAUTION Risk of crushing!
Fingers or hands could be crushed when the hand grips are pushed together.
► To not reach in between the two hand grips!
► Do not take hold of the piston rod!
► Do not reach in between the hand grips and supply tank!
► Pay attention that no limbs move between the hand grips!
ATTENTION!
Risk of material damage at the valve stop due to too high a load.
► Only tighten the fine adjustment and pressure release valves hand tight
on reaching the stop!
The following conditions must be fulfilled before the test kit can be operated:
„ The ServiceJunior is connected to the hand pump and has been vented.
„ The pressure hose is connected to the hand pump.
„ The test object is connected to the pressure hose with a suitable adapter and seal
and has been vented.
14
V2.0/07/20