Klarstein Partytime 10035294 Manual Del Usuario página 21

9. The ice-making cycle starts with water being pumped into the ice tray situated
below the evaporator. Over the next 7-15 minutes ice forms on the evaporator.
Once this has completed, the ice tray will tilt backwards and the remaining water in
the ice tray is drained back into the water reservoir. The ice cubes are then dropped
from the evaporator and pushed forward into the ice basket by the ice shovel. The
ice tray will automatically move back into position under the evaporator and start
the next cycle.
10. The "Ice basket full" indicator
ice cube maker will stop the ice-making cycle automatically. Gently remove the ice
cubes from the ice basket with the ice scoop. About 5 seconds later, the ice cube
maker will restart its ice making function automatically.
1 1. The "Water reservoir empty" indicator
lack of water and the ice-making cycle will stop automatically. At that time, remove
the ice basket and add water to the water reservoir, and then press the Start/Stop
button again to restart the ice-making cycle.
12. When you have got your desired amount of ice, stop the ice making cycle by
pressing the Start/Stop button
13. Open the top lid, remove the ice cubes with the ice scoop and place them in the
freezer.
Note: The ice cubes will last in the ice cube maker for up to an 18-hour period,
depending on the ambient temperature.
14. Allow the ice cube maker to wall up to room temperature.
15. Suggest replacing the water at least once a week. Please empty the water reservoir
if the ice cube maker is not used for a long time.
lights up when the ice basket is ful land then the
will light up when the water reservoir is
and unplug the appliance from the wall outlet.
EN
21