Important Safety Information - JBM 53684 Manual De Instrucciones

REF. 53684
EN
INSTRUCTION MANUAL
Save this manual
Keep it for the safety warnings and precautions,
operating, assembly, inspection, maintenance
and cleaning procedures.
Keep this manual in a safe and dry place for fu-
ture reference.
DANGER
WARNING
CAUTION
NOTICE
CAUTION

IMPORTANT SAFETY INFORMATION

Read all safety warnings and
WARNING
instructions. Failure to heed
these markings may result in a personal injury
and/or property damage. Save all warnings and
instructions for future reference.
The warnings, precautions and instructions dis-
cussed in this manual cannot cover all possible
conditions and situations that may occur. It must
be understood by the operator that common
sense and caution are the factors which cannot
be built into this product, but must be supplied
by the operator.
Work area
1. Keep the work area clean and well lighted.
Cluttered benches and dark areas increase the
risk of injury to persons.
2. Keep bystanders and children away while
operation the tool. Distractions can result in loss
of control of the tool.
Personal safety
1. Stay alert. Watch what you are doing and use
commons sense when operation the tool. Do
not use the tool while tired or under influence
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you of potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible
injury or death.
Indicates a hazardous situation which, if not avoided, may result in a bad injury
or death.
Indicate a hazardous situation which, if not avoided, , may result in a bad
injury or death.
Indicates a hazardous situation which, if not avoided, may result in a minor or
moderate injury.
Addresses practices not related to personal injury.
Read carefully and unders-
WARNING
tand
OPERATION INSTRUCTIONS before opera-
ting. Failure to follow the safety rules and
other basic safety precautions may result in
serious personal injury.
of drugs, alcohol or medication. A moment of in-
attention while operating the tool increases the
risk of injury.
2. Dress properly. Do not wear loose clothing or
jewelry. Contain long hair. Keep long hair, clo-
thing and gloves away from moving parts. Loo-
se clothes, jewelry, or long hair increase the risk
of injury to persons as a result of being caught
in moving parts.
3. Do not overreach. Keep proper footing and
balance at all times. Proper footing and balance
enables better control of the tool in unexpected
situations.
4. Use safety equipment. Wear safety goggles
and heavy-duty work gloves during use.
Tool use and care
1. Do not force the tool. Choose the right tool for
the application. The right one will do the job bet-
ter and safer at the rate for which was designed.
2. Store the tool when you are not using it, so it
won't be reachable for kids and untrained peo-
ple.
3. Check for misalignment or binding of moving
parts, and any other condition that affects the
tool's operation. If damaged, have the tool ser-
· 9 ·
all ASSEMBLY AND