Special Safety Instructions For This Device; Overview Of The Controls; Description Of The Controls; Assembly - Super Ego 300 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

GB
Operating instructions

Special Safety Instructions for this Device

- If the high-pressure washer is handled incorrectly,
this may prove hazardous for individuals and
materials. Children and young people are often not
able to evaluate risks. They should therefore not be
allowed to operate the device.
- Never leave the device unattended when the main
switch is turned on.
- During work breaks the manual spray gun should be
secured by the lock.
Danger of Death!
- Never operate the device in rooms where there is a
risk of explosion.
- Never touch the mains plug with wet hands.
- As additional protection the installation of a residual
current circuit breaker with a minimum sensitivity
of 30mA is recommended in the electric circuit of
the bathroom. Please seek advice from a qualified
electrician.
- Prior to start up always check the mains power cable,
mains plug and high-pressure hose for damage.
Damaged cables must be replaced immediately by
an approved qualified electrician. Damaged high-
pressure hoses are to be replaced immediately.
- The following should be taken into consideration
when cleaning motor vehicles: Tyres and tyre valves
may be damaged by the high-pressure jet and then
burst. The first indications of this are discoloration of
the tyre. Only the fan jet should be used. A distance
of at least 50cm should be maintained during the
cleaning process.
Danger of Injuries
- The water jet emerging from the high-pressure
nozzle causes the manual spray gun to recoil.
- Please ensure you are standing in a stable location.
Hold the manual spray gun and the jet pipe as tightly
as possible.
- If required, you should wear appropriate protective
clothing against the spray.

Description of the controls

1. Main ON/OFF switch
2. High-pressure outlet
3. Water inlet connection with filter
4. Coupling section
5. High pressure lance
6. Supply hose(not supplied)
7. High-pressure hose
8. Gun handle(with lock function)
9. Main plug
10. Pressure control valve
11. Pressure gage
12. Detergent tank

Assembly

Remove the motor and accessories from the box. Also
remove any packing materials that may be present.
12

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido