Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
7. CUSTOMISING THE QUANTITY OF COFFEE BEVERAGES WITH THE
1. Prepare the appliance to
deliver the beverage you
want to make. Prepare the
coffee dose and attach the
portafilter to the coffee out-
let: if you have to customise
a milk based beverage,
prepare and also attach the
Lattecrema System .
5. When you have reached
the desired quantity of
the beverage, press the OK
button again. If the recipe
includes another ingre-
dient, it starts delivery:
when you have reached
the desired quantity, press
the OK button again.
1
2. Turn the dial (B10) to
select the drink to be
programmed.
5
6. Press the
button to
save the new setting. The
appliance is ready for use
again and the
ton remains on.
If you do not want to save the
new setting, press any other
button.
2
3. Press the
the light corresponding
to the OK button (B6)
comes on steadily and the
light corresponding to
the
button flashes.
Please note:
•
You can programme coffee beverages, but not steam and
hot water.
•
Programming changes the quantity of the beverages, but
not the amount of coffee ground.
•
"X2" beverages can be programmed separately.
•
6
programmable.
• To reset the default beverage quantities, press and hold
the
button until it goes off. The selected beverage is
reset to the default values.
but-
Coffee Recipe
X2
X2
X2
15
BUTTON (B9)
3
button:
4. Press the OK button to
start delivering the bev-
erage. The lights corre-
sponding to the OK and
buttons flash.
is not
Default
Programmable quantity
quantity
35 ml
from 25 to 90 ml
70 ml
from 50 to 180 ml
80 ml
from 50 to 120 cc
160 ml
from 120 to 240 ml
100 ml
• espresso: from 25 to 120 ml
• water: from 25 to 60 ml
200 ml
• espresso: from 50-120 ml
• water: from 50 to 240 ml
4
Publicidad
Tabla de contenido
Solución de problemas
