2. PREPARING YOUR MACHINE FOR FIRST USE
REMOVE
PROTECTION FILM
BEFORE USE
REMOVE
PROTECTION FILM
BEFORE USE
1. Remove stickers and pack-
ing materials.
REMOVE
PROTECTION FILM
BEFORE USE
5. Plug the power cord con-
nector (C7) into the socket
(A16) at the back of the
machine, then plug into
the mains socket.
9. Insert coffee filter ((C2)
or (C3)) in the portafilter
(C1).
1
2. Wash and dry all acces-
sories (including water
tank) with warm water
and washing-up liquid.
5
6. Make sure the main
switch (A17) at the back
of the machine is pressed
and in the I position.
9
10. Attach the filter holder
filter to the machine. To
attach correctly, align the
filter holder handle with
"INSERT", then turn the
handle to the right until
it is aligned in the "CLOSE"
position.
2
3. Insert the drip tray (A11)
complete with cup grill
(A9) and (A10).
6
7. Place a container with
a minimum capacity of
100 ml under the hot
water spout (close to the
coffee outlet (A7)).
10
11. Place a container under
the portafilter and froth-
ing wand and press
(B5).
6
MAX
3
MAX
4. Remove the water tank
(A15) and fill with fresh
clean water, taking care
not to exceed the MAX
MAX
level.
7
8. Press (B7) e
rinse.
11
12. Open the steam dial for a
few seconds. For optimal
steam performance we
recommend you repeat
this action 3 or 4 times.
This is to purge the steam
rm before frothing or
steaming your milk.
4
8
to
12