SPIT SD17P Manual De Usuario página 11

Intended use
SD 17P: In conjunction with dry diamond core bits and an integrated extraction device,
the machine is intended for dry drilling in bricks, sandstone, aerated concrete and tiles.
All uses for other purposes are prohibited.
The tool is equipped with a spirit level as help for horizontal drilling, mechanical clutch,
soft start, thermal protection, and overload protection.
Confirmation declaration
We declare under our sole responsibility that the product described under "Technical
Data" is in conformity with the following standards or standardization documents:
EN 60745 according to the provisions of the directives 2011/65/EU, 2004/108/EC,
2006/42/EC.
Guy Jaillet
Director
Business Development & Innovation
FUNCTIONAL DESCRIPTION
Electrical connection
Prior to putting the tool into operation, check the mains voltage for conformity with the
requirements of the tool's nameplate.
Voltage variations between + 6 % and – 10 % are permissible.
The tool includes a start-up speed limiter to prevent fast expulsion fuses from
unindented responding.
Only use extension cables with a sufficient cross-section. A cross-section which is too
small could cause a considerable drop in performance and an overheating of machine
and cable.
Recommended minimum cross sections and maximum cable lengths
Mains voltage
Cross section in mm
Maximum cable length
SPIT SAS
150, Route de Lyon
26500 Bourg-lès-Valence Cedex
France
230 V
1.5
2
50 m
Ruben Bernaert
Product Manager
2.5
80 m
6