Technical Specifications - SPIT SD17P Manual De Usuario

TECHNICAL SPECIFICATIONS

Power
Voltage
Frequency
Current
Impact frequency 1st speed
No load speed
Full load speed
Maximum drill potential
Connection
Safety mechanism
Thermal safety mechanism
Protection against excess pressure
Protective class
Cable
Weight EPTA
Measurements
Hand grip
Noise and vibration
Measured sound values determined according to EN 60745-2-1
Typically the A-weighted noise levels of the product are:
Sound pressure level LpA 94 dB(A).
Sound power level LwA 105 dB(A).
Uncertainty K=3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration level: a
Vibration level: a
The vibration emission level given in this information sheet has been measured in
accordance with a standardized test given in EN 60745 and may be used to compare
one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may significantly increase the
exposure level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched off or when it
is running but not actually doing the job. This may significantly reduce the exposure
level over the total working period. Identify additional safety measures to protect the
operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organization of work patterns.
5
1800 W
220-240 V
50-60 Hz
7,8 A
28800 bpm
2nd speed 57600 bpm
2400 / 3600 min
1200 / 1980 min
Ø 181 mm
M41 & 1/2"
mechanical clutch
yes
through an electronic system
II
4 m
5,51 kg
500 x 210 x 115 mm
yes
: 10,1 m/s² K= 1,5 m/s² (drilling without impact into concrete)
h
: 17,3 m/s² K= 1,5 m/s² (drilling with impact into concrete)
h
-1
-1