Rain Cover - CASUALPLAY s-twinner Manual De Instrucciones

Ocultar thumbs Ver también para s-twinner:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
WARNING: THE CHILD SHOULD NOT BE IN THE SEAT WHILE ANY CHANGES ARE
MADE TO IT (CHANGING THE WAY IT FACES, FITTING OR REMOVING THE SEAT).
CHANGING THE WAY THE SEAT FACES (illustrations 17-20)
• Put the parking brake on.
• Press the side buttons on both sides of the seat. A red mark will appear in the window
(Fig.17). Then pull the seat upwards (Fig.18).
• Install the seat in the required position (Fig.19) and make sure that the green mark
appears in the window indicating it is correctly fastened (Fig.20). The child can now be
placed in the seat.
ADJUSTING THE SAFETY HARNESS (illustrations 21-23)
• Put the parking brake on (Fig.21).
• Check that the safety harness is open before placing the child in the seat.
• Seat the child, adjusting the height of the chest straps and the abdominal belt of the
harness (A) to fit the child (Fig.22).
• Fasten all the parts of the fastening clip: chest straps, abdominal belt and crotch strap
(Fig.23).
ADJUSTING THE BACKREST (illustrations 24-26)
• The backrest has 2 reclining positions.
• Pull the lever situated on the back of the seat upwards (Fig.24), and place the backrest
in the required position (Figs.25-26). Once the position has been chosen, release the
lever on the back.
FOLDING THE S-TWINNER (illustrations 27-32)
• Remove the seats, the
• Unlock the safety latch (Fig.27).
• Simultaneously lift the buttons on the handlebar (Fig.28) and pull the pushchair handle
forwards (Fig.29).
• With the brake on, push the handlebar downwards until the pushchair is in the position
shown (Fig.30).
• Make sure that the safety fastener is in place. It clicks when in the correct position
(Fig.31).
• Close the safety catch (Fig.32).

RAIN COVER

WARNING: THIS RAIN COVER CAN NOT BE USED ON A PUSHCHAIR THAT IS NOT
FITTED WITH A HOOD.
• Unfold the hood.
• Place the rain cover on the pushchair and fasten the zip to the hood, and fasten the
Velcro strips to the chassis.
BASKET
• The basket fastens onto the lower part of the frame with clasps, to remove it simply undo
the clasps.
• The maximum weight the basket can carry is 5 kg.
• It is advisable to empty the basket before folding the pushchair up.
14
PRIMA EASY, PRIMA FIX, BABY 0+, SONO
.

Publicidad

Tabla de contenido
loading

Tabla de contenido