Cushion Adjustment - Permobil ROHO DRY FLOATATION Operación Manual

ROHO DRY FLOATATION Cushion Operation Manual - Dual Compartment, Single Compartment, Sensor Ready
IF YOU OWN A SMART CHECK:
The Sensor Ready Cushion is equipped with Sensor Ready Technology and can be used
with Smart Check, which is a cushion feedback system. Smart Check can be used to find
the individual's inflation level and help check their cushion. For more information, contact
Customer Support.
NOTE: If you own a Smart Check, STOP HERE and refer to the Smart Check operation
manual.

Cushion Adjustment

Warnings:
- Check inflation frequently, at least once a day!
- DO NOT use an under-inflated cushion or an over-inflated cushion because the product benefits
will be reduced or eliminated, resulting in an increased risk to skin and other soft tissue. If the
cushion does not appear to be holding air, or if you are not able to inflate or deflate the cushion, see
"Troubleshooting". Immediately contact your clinical caregiver, distributor, or Customer Support if the
problem persists.
- When possible, use hook and loop fasteners to further secure the cushion to the seating surface. Hook
fasteners are available upon request.
Cover placement: Refer to the instructions provided with the cover.
Note: Keeping a cover on your cushion will help to protect the cushion components.
1. Inflate the cushion:
a. Place the cushion in the wheelchair with the
air cells facing up and the non-skid surface of
the cover facing down.
b. Slide the hand pump nozzle over the inflation
valve. Open the inflation valve, at least one
full rotation.
Note: The inflation valve will spin freely when
open.
c. Inflate until all of the air cells feel firm. Close
the inflation valve until it comes to a stop.
Remove the hand pump. Make sure the
inflation valve is closed.
Note: See the next page.
Cushion Cover
Quick Disconnect
(Sensor Ready Cushion)
Open
5
Inflation Valve
Close