Cleaning The Drain Pump Filter - EAS ELECTRIC EMW580E3 Manual De Usuario

MAINTENANCES

Cleaning The Drain Pump Filter

Warning!
！
• Be careful of the hot water!
• Allow detergent solution to cool down.
• Unplug the machine to avoid electrical shock before washing.
• Drain pump filter can filter the yarns and small foreign matters from the
washing.
• Clean the filter periodically to ensure the normal operation of washing
machine.
。
Open the Service filter
Caution!
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap
plates should be inserted aligning to hole plates otherwise water may leak;
• Some machines don't have emergency drain hose, rotate lower cover cap directly
to make water run into basin.
• When the appliance is in use and depending on the programme selected there can
be hot water in the pump. Never remove the pump cover during a wash cycle, always
wait until the appliance has finished the cycle, and is empty. When replacing the
cover, ensure it is securely re-tightened.
1
Open the filter by turning
to the counter clockwise
2
Remove extraneous
matter
23
3
Close the lower cover cap
V.1
4