Power Save Function; Battery Type And Remaining Power; Auto Power Off Function - Korg RK-100S 2 Manual Del Usuario

Power save function

When the RK-100S 2 is being powered by batteries, the
power save function will automatically turn off the display
and LEDs depending on the remaining battery power level.
Note: With the factory settings, the power save function
is Off.
1. Hold down the SHIFT button and press the
favorites F button.
The setting for the power save
function appears in the display.
2. Use the OCTAVE +/- buttons or
the SOUND/FAVORITE BANK
lever to select the setting.
on: Enabled
oFF: Disabled
3. Press the SHIFT button to exit the shift function.

Battery type and remaining power

This allows you to select the type of battery to be used.
In addition, the remaining power level of the batteries
currently being used can be checked.
If the selected type is different from the type of
batteries being used, the remaining amount of
battery power will not be correctly indicated.
1. Hold down the SHIFT button and press the
favorites G button.
The battery type appears in the
display.
The eight favorites buttons
(A–H) are lit up to indicate the
remaining battery power level.
The number of lit buttons may
be lower depending on the
battery capacity.
New batteries: All buttons lit
Low remaining battery power level: Only button A lit
Time to replace batteries: Button A blinks
When the AC adapter is connected, all buttons are
turned off.
2. Use the OCTAVE +/- buttons or the SOUND/
FAVORITE BANK lever to select the battery type.
AL.: Alkaline batteries
ni.H: Nickel-metal hydride batteries
3. Press the SHIFT button to exit the shift function.

Auto power off function

The RK-100S 2 is equipped with an auto power off
function. With this function, the RK-100S 2 automatically
turns off (low power consumption state) if there is no use
for approximately four hours.
If the RK-100S 2 has been automatically turned off with
the auto power off function, it cannot be turned on by
pressing a button or keyboard key or using a ribbon
controller. Turn the RK-100S 2 on again.
Note: With the factory settings, the auto power off func-
tion is enabled.
1. Hold down the SHIFT button and press the
favorites H button.
The setting for the auto power
off function appears in the
display.
2. Use the OCTAVE +/- buttons or
the SOUND/FAVORITE BANK
lever to select the setting.
4hr: Enabled
diS: Disabled
3. Press the SHIFT button to exit the shift function.
Shift functions
17