Korg RK-100S 2 Manual Del Usuario página 6

RK-100S 2 Owner's Manual
6. VOLUME knob
This adjusts the volume of the Output jack.
7. SOUND/FAVORITE BANK lever
This selects the program. Move the lever to the + or -
direction to switch to the next or previous program.
Tip: The SOUND/FAVORITE BANK lever can also be used
to specify settings for the shift functions.
8. TAP button
This specifies the tempo (speed) of the arpeggiator, LFO
or delay effect.
The tempo is specified according to the number of
times the button is pressed. The LED will blink in
synchronization with the tempo.
In addition, hold down the SHIFT button and press this
button to play the demo song (see 10 page "Demo
performance").
9. ARP button
This turns the arpeggiator on/off (see 14 page "Playing
arpeggios").
In addition, hold down the SHIFT button and press this
button to change the settings of the arpeggiator.
10. SHORT RIBBON button
This switches the parameter that's controlled by the short
ribbon controller.
When the button is lit up in red, the pitch of the sound
can be controlled.
6
When the button is lit up in green, the modulation of the
sound can be controlled.
In addition, if you hold down the SHIFT button and
press the SHORT RIBBON button, the audio input signal
from the INPUT jack will be sent from the Output jack
without modification.
11. SHIFT button
Hold down this button and press the corresponding
button to play the demo song or specify settings for the
shift functions. (See page 10 "Favorites function")
If you hold down the SHIFT button while operating the
buttons and lever with labels encircled by a box (such
as "HOLD" or "FAVORITE BANK"), you can make the
sound sustain, or switch between favorite banks.
12. Favorites buttons A–H
Your favorite programs can be assigned to these buttons.
The program can be quickly recalled by pressing
the corresponding button. (See page 10 "Favorites
function")
In addition, hold down the SHIFT button and press one
of the favorites buttons (A–H) to enter a shift function
and change the settings for the function. (See page 15
"Shift functions")
13. Output jack [stereo jack]
You can connect powered monitors, a stereo amp, mixer,
or headphones to this jack.
1