EUROM VT9 Manual De Instrucciones página 13

Only Fan (S)
possible over the upper stand (13). Ensure that the locking nut (11)
that is located on the button unit is situated in the appropriate hole
on the upper stand. Then turn the locking nut to secure.
You can now set the fan to the required height by undoing the clamp
coupling (14) and pulling the upper stand further out of the lower
stand (or lowering it into the lower stand). Once the required height
has been achieved, turn the clamp coupling to secure.
Fan (T) & Fan (S): The fan is now ready for use.
OPERATION
The fans can be set to different speeds: The VT9 has two settings;
the VT12, VT16 and VS16 have three settings. All types of fan are
equipped with an oscillation function (45°).
If
you can use the fan.
I - Insert the plug into the socket.
II – Select setting: 0=off, 1=standard, 2=strong and 3=extra strong.
Place the fan with the button unit (12) as far as
- the fan has been fully assembled
- all connections have been properly secured
- all safety guidelines have been taken into account
13