Kohler K-1174-H2 Guia Del Usuario página 2

21"
(533 mm)
23"
(584 mm)
1/2" (13 mm)
Product Information
Applicable product:
Drop-in bath whirlpool
Fixture*:
Bathing well:
Basin area bottom 45-3/4" (1162 mm) x 32" (813 mm)
Basin area top 66" (1676 mm) x 36" (914 mm)
Weight 135 lbs (61.2 kg)
To overflow:
Water depth 19" (483 mm)
Capacity 139 gal (526.2 L)
* Approximate measurements for comparison only.
Drop-in cut-out 70-1/2" (1791 mm) x 40-1/2" (1029
mm)
Pump kW
Variable-speed 1.5
Required accessories:
Clearflo slotted overflow brass bath
drain OR
Clearflo slotted overflow bath drain -
PVC pipe
Jet trim kit
1167577-1-B
36" (914 mm)
72" (1829 mm)
4-1/8" (105 mm)
K-1174-H2
V Hz A
240 50/60 11
K-7271
K-7272
K-9698
1-1/2"
No change in measurements if connected with
(38 mm)
drain illustrated. (K-7272)
1" (25 mm)
Note: Pump protrusion beyond the rim.
1"
(25 mm)
Optional accessories:
Undermount kit
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current
Device (RCD):
Pump/control:
Notes
Install this product according to the installation guide.
Hot water supply should be 70% of capacity guide.
A pump/control access panel is required.
Floor support under the bath must provide for a minimum of 63
lbs/square foot (309 kg/square meter) loading.
Fixture conforms to ANSI Standard Z124.1.2. All dimensions are
nominal.
2
Pump/Control Access
34" (864 mm) W x
15" (381 mm) H Min
42" (1067 mm)
2-7/16"
(62 mm)
1-1/2"
Bath Drain
K-592
220-240 V, 20 A, 50/60 Hz
Kohler Co.