Human Touch Perfect Chair PC-600 Manual De Uso Y Manitenimiento página 5

put it together
Attach the backrest frame
1. Remove the backrest frame screws.
Using the provided Phillips-head screwdriver,
remove the two screws/washers from the two
lower ends of the backrest frame. Save these
screws/washers as they will be used later in the
assembly process (Fig.1).
2. Insert the backrest frame into the chair base.
With the backrest frame positioned so that the
headrest can tilt forward, slide the two ends of
the backrest frame into the open tube ends of the
chair base (Fig.2).
humantouch.com
Backrest frame
Screw
Fig.1
Washer
Fig.2
6
3. Install the canvas backrest support.
Pull the chair canvas firmly upward as far
as it will go, wrap the top flap around the
backrest frame and secure it using the hook-
and-loop fasteners. It is important that the
canvas be stretched tight to provide proper
back support (Fig.3).
4. Replace the backrest frame screws.
Using the Phillips-head screwdriver, install the
two screws with washers (previously removed
from the backrest frame) to secure the backrest
frame and glide rail safety tip(Fig.4).
WARNING:
You must install these two screws before using the chair; failure to do so may cause
severe injury.
Top flap
Canvas
Hook-and-loop fasteners
Fig.3
Backrest frame
Glide rail safety tips
Fig.4
7 7