Amplicomms AW 500 Manual De Instrucciones página 11

AW 500
1 "Time" button
2 "Alarm" button
3 "Change" button
4 Dial for adjusting the analogue time
5 "Select" button
Settings
Note: After having finished the setting press button 1 or
button 2 to return to the normal display status. If no but-
ton is pressed within 15 seconds, the setting mode will exit
and the display will return to its normal status.
Digital Clock 12H / 24H mode setting change
(on delivery: 24h)
1 Press and hold down button 1 and button 3 simulta-
neously for 5 seconds. The current clock mode "12H"
or "24H" will flash.
2 Press button 3 to change the mode.
3 If the desired mode is shown (flashing), press button
5 to select and save.
8
Helpline UK 0844 800 6503
(See on page 15 for costs and hours of operation)