Amplicomms AW 500 Manual De Instrucciones página 15

S
ETTINGS
8 Press button 3 to toggle between "A" and "P".
9 Press button 5 to confirm the setting.
10 The word "ON" flashes in the display.
11 Press button 3 to toggle between "ON" and "OFF".
12 Press button 5 to confirm the setting.
13 The display will light constantly. The set alarm time will
be shown for approx. 15 seconds.
• If you press button 3 during this period, the hour
digits will flash and you can change the alarm time set-
ting again (-> step 4).
• If you press button 5 during this period, the alarm
number will flash and you can set another alarm time
(-> step 2).
• If no button is pressed within 15 seconds, the setting
mode will exit and the display will return to its normal
status.
Note: If no alarm is activated the display shows "OFF".
When alarm time settings have finished, the display will
show the next active alarm time.
12
Helpline UK 0844 800 6503
(See on page 15 for costs and hours of operation)