Technical Data - S&P QUADRO - 250 Manual De Instalación

4 - CHARACTERISTICS AND TECHNICAL INFORMATION
GENERAL DESCRIPTION.
The QUADRO-250 Model is a heating panel for both domestic use and industrial
use. It is essentially designed to heat areas in offices, businesses, laboratories
and other rooms. Thanks to its flat design, it blends in well with the decoration in
any of these settings.

TECHNICAL DATA

Classification against risk of electric shock:
Degree of protection: IP 40
Colour Dimensions
RAL
595x595x30
9010
* Surface temperature refers to an ambient temperature of 20ºC
* TECHNICAL STANDARD APPLIED
* The radiant panel has been developed following the rules laid down by the Low
Voltage Directives
UNE-EN 60335-1:2002
UNE-EN 60335-2-30:2004
5 - INSTALLATION INSTRUCTIONS
PRELIMINARY OPERATIONS AND WARNINGS
Consult this manual on use and maintenance carefully before using the
appliance.
Unpack the appliance carefully and ensure that the panel is in a perfect
state. Should it present any defect or damage do not install it or try to repair it.
Contact your usual supplier or S&P technical service immediately.
Power
(mm) (W)
250
Class II
Voltage Current
± 10% (A)
230 V 1.1
10
Surface
area
temperature
90ºC