Install The Power Cord Storage Arm; Install The Spray Wand; Install The Upper Handle - GreenWorks Pro PW18HYB Manual Del Operador

4.6 INSTALL THE POWER CORD
STORAGE ARM
1. Attach the power cord storage arm (13) onto the fixture.
2. Align the screw with the hole in the power cord storage
arm (13).
3. Push the screw through and tighten it with a Phillips head
screw driver (not included).
4.7 INSTALL THE HOSE HOOK
1. Push the hose hook (14) ends into the clips (28) behind
the upper panel tightly .
4.8

INSTALL THE UPPER HANDLE

1. Push and hold the handle lock button (18) on the upper
handle (12).
English
2. Move the upper handle (12) into the lower handle (10)
until the handle lock button (18) clicks through the slot
(19).
4.9

INSTALL THE SPRAY WAND

1. Push the end of the spray wand (4) into the trigger handle
(1) and rotate clockwise to secure.
2. Pull on the spray wand (4) to be certain it is properly
secured.
Make sure that the connection has no leakage.
4.10 INSTALL THE HIGH PRESSURE
HOSE
1. Push and turn clockwise one end of the high pressure
hose (20) into the inlet coupler (6).
2. Take the end of the included high pressure hose (20) and
tighten onto the valve (31).
4.11 INSTALL THE PRIMING VALVE
31
11
WARNING
9
EN