Craftmade Montreal MN44-LED Guia De Instalacion página 6

5. Fan Assembly. (cont.)
With the hanging bracket secured to the outlet box
and able to support the fan, you are now ready to
wood ceiling joist
hang your fan. Grab the fan firmly with two hands.
safety cable loop
Slide downrod through opening in hanging bracket
and let hanging ball rest on the hanging bracket.
Turn the hanging ball slot until it lines up with the
hanging bracket tab.
wood screw
and washer
WARNING: Failure to align slot in hanging ball with
tab in hanging bracket may result in serious injury
screw
or death.
nut
safety cable
Tip: Seek the help of another person to hold the
stepladder in place and to help lift the fan up to you
hanging bracket tab
once you are set on the ladder.
hanging ball slot
hanging ball slot
Find a secure attachment point (wood ceiling joist
highly recommended) and secure safety cable. It
will be necessary to use a heavy duty wood screw,
washer and lock washer (not supplied) with the
safety cable loop.
Replace vice on safety cable and adjust safety
cable length by pulling on the cable. Adjust slack
in cable to a hands length and secure vice by
tightening screw and nut securely. The loop at the
end of the safety cable should just fit over the
threads on the wood screw. Test safety cable by
pulling on loose end with pliers. If the safety cable
slips, the screw and nut on the vice must be set
tighter.Extra cable slack can be left in ceiling area.
page 5