Wiring; Wiring-Wall Control - Craftmade Montreal MN44-LED Guia De Instalacion

6. Wiring

WARNING: Turn off circuit breakers to current
fixture from breaker panel and be sure switch is
turned to the OFF position.
CAUTION: Be sure outlet box is properly grounded
and that a ground wire (GREEN or Bare) is present.
Make sure all electrical connections comply with
Local Codes or Ordinances and the National
Electrical Code. If you are unfamiliar with electrical
wiring or if the house/building wires are different
colors than those referred to in the instructions
below, please use a qualified electrician.
Note: Excess lead wire length from the fan can be
cut to the desired length and then stripped.
When fan is secured in place on the hanging
bracket, electrical wiring can be made as follows:
Connect BLACK and BLUE wires from fan to
BLACK wire from ceiling. Connect WHITE wire
from fan to WHITE wire from ceiling. Connect all
GROUND (GREEN) wires together from fan to
BARE/GREEN wire from ceiling.
connectors provided when making connections.
* Wrap each wire connector separately with
electrical tape as an extra safety measure.
7. Wiring - Wall Control
Remove existing wall switch. Wire the wall
control as shown in diagram at right.
Connect BLACK/WHITE wire from wall control
to BLACK (AC IN L) wire in outlet box. Connect
BLACK wire from wall control to BLACK (AC IN
N) wire from fan (inside the outlet box).
Connect BLUE wire from wall control to BLUE
wire from light in the outlet box.
GREEN/YELLOW ground wire from wall control to
ground wire in the outlet box.
provided when making connections.
*Wrap each wire connector separately with
electrical tape as an extra safety measure.
Gently push wires and taped wire connectors
into outlet box.
Attach wall control to outlet box and secure
with screws from original wall switch. Attach
plate (included) to wall control using 2 screws
provided with the wall control.
Use wire
Connect
Use wire connectors
page 6
white supply wire
black supply wire
from ceiling
black
white
white
black
blue
from fan
BLACK
BLACK/WHITE
(AC IN L)
outlet box
BLUE
BLUE
green/
GREEN/
bare
YELLOW
ground
BLACK BLACK
(AC IN N
from fan)
ground
(green or bare)
ground
(green
or bare)
plate
screw
wall control
plate