Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
SEWAGE PUMP
MODEL #30EC, 50EC, 30TC, 50TC, 433152
30EC, 50EC
QUICK REFERENCE GUIDE.
SEE INSTRUCTION MANUAL FOR
COMPLETE DETAILS.
30TC, 50TC, 433152
3
Secure power cord to discharge pipe and plug into a GFCI-
protected outlet.
1
Place pump securely in minimum 18 in. x 30 in. basin on a
solid surface such as a cement block.
4
Add water to basin to test operation. Pump should turn on and
off at these approximate levels.
GFCI-
protected
Item
receptacle
30TC,
433152
50TC
30EC, 50EC
30 in.
Cement
Block
18 in.
Off
On Level
Level
15.7 in.
8.2 in.
14 in.
9 in.
9-1/2 in.
5-1/2 in.
2
Connect 2 in. discharge pipe with vent hole, union, check valve
and gate valve to main waste line.
Main
Gate Valve
Waste Line
Check
Valve
5
Seal basin with lid and install vent pipe per codes.
Vent
Pipe
Union
Vent Hole
SW0946 B
Publicidad
Manuales relacionados para Calpeda 30EC
Resumen de contenidos para Calpeda 30EC
- Página 1 Place pump securely in minimum 18 in. x 30 in. basin on a Connect 2 in. discharge pipe with vent hole, union, check valve solid surface such as a cement block. and gate valve to main waste line. MODEL #30EC, 50EC, 30TC, 50TC, 433152 Main Gate Valve Waste Line...
- Página 2 45,72 cm (18 in.) x 76,20 cm (30 in.) sobre una ventilación, unión, válvula de control y válvula de compuerta a SERVIDAS superficie sólida, como un bloque de cemento. la tubería de desagüe principal. MODELO #30EC, 50EC, 30TC, 50TC, Main 433152 Gate Valve Waste Line...