Publicidad
Idiomas disponibles
Idiomas disponibles
certified LP dealers.
LP Tank Exchange
• Many retailers that sell appliances offer you the option
of replacing your empty LP tanks through an exchange
service. Use only those reputable exchange companies
that inspect, precision fill, test and certify their cylinders.
Exchange your tank only for an OPD safety feature-
equipped tank as described in the "LP Tank" section of
this manual.
• Always keep new and exchanged LP tanks in upright
position during use, transit or storage.
• Leak test new and exchanged LP tanks BEFORE
connecting to appliance.
LP Tank Leak Test
For your Safety
Appliance must be leak checked outdoors in well-
ventilated area, away from ignition sources such as
gas fired or electrical appliances. During leak test, keep
appliance away from open flames or sparks.
• Leak test must be repeated each time LP tank is
exchanged or refilled.
• Do not smoke during leak test.
• Do not use an open flame to
check for gas leaks.
Use a clean paintbrush and 50/50
soap and water solution. Use
mild soap and water. Do not use
household cleaning agents. Damage
to gas train components can result.
Brush soapy solution onto all weld
seams and entire valve area.
If "growing" bubbles appear, do not use or move the LP
tank. Contact an LP gas supplier or your fire department.
Connecting The Lp Gas Cylinder to The Grill
1. Check that the cylinder valve is closed by turning the
knob clockwise.
2. Place the cylinder under the right shelf as shown.
WARNING
WARNING
3. Orient the cylinder such that the valve opening faces the
right side or the front of the grill, and so that the hose is
not kinked or damaged.
4. Attach or detach regulator to the LP gas cylinder only
when cylinder is at rest in tank holder.
5. Remove the protective cap from LP tank valve. Always
use cap and strap supplied with valve.
Do not use a POL transport plug
(plastic part with external threads).
It will defeat the safety feature of the
valve.
6. Hold regulator, insert nipple (B)
into LP tank valve. Hand tighten
coupling nut, holding regulator in
a straight line (C) with LP tank valve so as not to cross
thread the connection.
10CM / 4 IN
7
Publicidad
