18"
(45.7 cm)
11" (27.9 cm)
2-1/2"
(6.4 cm)
Product Information
Applicable product:
Bath whirlpool with spa/massage package
Fixture*:
Bathing well:
Basin area bottom
42" (106.7 cm) x 25" (63.5 cm)
Basin area top
58" (147.3 cm) x 29" (73.7 cm)
Weight
510 lbs (231.3 kg)
To overflow:
Water depth
18" (45.7 cm)
Capacity
96 gal (363.4 L)
* Approximate measurements for comparison only.
Drop-in cut-out
65-1/2" (166.4 cm) x 35-1/2" (90.2 cm)
kW
Pump
Heater
1.5
Required accessories:
Grip rails (pair)
1023268-1-C
K-856-V
66" (167.6 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-856-V
V
Hz
A
240
50/60
15
240
50/60
15
K-9653
2" (5.1 cm) Max
Pump/Control Access
34" (86.4 cm) W x
15" (38.1 cm) H Min
3/4" (1.9 cm)
1/2" (1.3 cm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current
Device (RCD):
Pump/control
Locate the outlet behind the whirlpool and within 24"
(61 cm) of the pump.
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of 81
lbs/square foot (395.4 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
Fixture conforms to ASME Standard A112.19.1M. All dimensions
are nominal.
2
No change in measurements with drain
shown. (K-7148-AF or K-7148M-AF)
NOTE: Pump/piping protrudes beyond rim.
36" (91.4 cm)
23"
(58.4 cm)
220-240 V, 20 A, 50/60 Hz
1-1/2" OD
Kohler Co.