Setting A Temperature - mabe MMT09CABWCCCHI8 Manual Instructivo

66
FAN mode
Repeatedly press the FAN SPEED until reaching the desired setting
according to the following sequence:
Auto High Medium Low
IMPORTANT: At FAN ONLY mode, "HIGH", "MEDIUM" and "LOW"
will be available. At DRY mode, fan speed is set at the AUTO setting
automatically, the FAN SPEED pad is ineffective in this case.

setting a temperature

IMPORTANT: The only way to regulate the temperature is through
the remote control. (page 64)
TEMP.
Press the TEMP UP pad once.
The set temperature will raise by 1°C or 1°F
TEMP.
Press the TEMP DOWN pad once.
The set temperature will decrease by 1°C or 1°F
changing temperature units
Press and hold the MODE and TEMP DOWN pads at the same time
for 3 seconds. The display will alternate units between the °C and °F
scales.
Important: The HEATING mode is NOT available on COOLING ONLY
models.
Note: At DRY mode, a decrease or rise of up to 7°C can be set using
the remote control.
Range of available set temperatures
HEATING, COOLING 16°C to 30°C (61°F to 86°F)
DRY -7 to 7
FAN ONLY No temperature can be set