Breitling ENDURANCE PRO Manual Del Usuario página 12

Ocultar thumbs Ver también para ENDURANCE PRO:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 30
USING THE CHRONOGRAPH
II. M
II. M
EASURING A SHORT TIME WITH SPLIT TIMES
EASURING A SHORT TIME WITH SPLIT TIMES
1. Press pushpiece A to start the chronograph. Hand 3 keeps track
1. Press pushpiece A to start the chronograph. Hand 3 keeps track
I. M
EASURING A SINGLE SHORT TIME
of the measured time in seconds.
of the measured time in seconds.
1. Press pushpiece A to start the chronograph. Hand 3 keeps track of
the measured time in seconds.
2. To check a split time without interrupting the overall time mea-
2. To check a split time without interrupting the overall time mea-
surement, press pushpiece B.
surement, press pushpiece B.
2. Stop the measurement by pressing pushpiece A once more. The
measurement is made in minutes (totalizer 1), seconds (hand 3)
and
/
of a second (totalizer 2).
1
ths
10
3. To go back to the ongoing time measurement display, press
3. To go back to the ongoing time measurement display, press
pushpiece B : the seconds measurement hand 3, and if neces-
pushpiece B : the seconds measurement hand 3, and if neces-
sary the minutes measurement hand 2 will "catch up" to the
sary the minutes measurement hand 2 will "catch up" to the
3. Reset the chronograph to zero by pressing pushpiece B.
measured time.
measured time.
22
22
21
18
III. M
III. M
EASURING AN INTERRUPTED SHORT TIME
EASURING AN INTERRUPTED SHORT TIME
1. Press pushpiece A to start the chronograph. Hand 3 shows the
1. Press pushpiece A to start the chronograph. Hand 3 shows the
measurement in seconds.
measurement in seconds.
2. To interrupt the measurement, press pushpiece A once more.
2. To interrupt the measurement, press pushpiece A once more.
To restart the time measurement, press pushpiece A. This
To restart the time measurement, press pushpiece A. This
procedure makes it possible to add up several short times.
procedure makes it possible to add up several short times.
3. The chronograph is reset to zero by pressing pushpiece B,
3. The chronograph is reset to zero by pressing pushpiece B,
once the fi nal measurement has been stopped.
once the fi nal measurement has been stopped.
23
23
19

Publicidad

Tabla de contenido
loading

Tabla de contenido