Transport; Storage - Kärcher B 110 R Manual De Instrucciones

After-running times
1. Turn the info button until the menu item "delay times" is
shown in the display.
2. Press the info button.
3. Turn the info button until the desired assembly is
marked.
4. Press the info button.
5. Turn the info button until the desired after-running time
is displayed.
6. Press the info button.
Set language
1. Turn the info button until the menu item "language" is
shown in the display.
2. Press the info button.
3. Turn the info button until the desired language is
marked.
4. Press the info button.
Key management
In the menu item "key menu" the authorizations for yellow
Intelligent Keys as well as the language of the display are
released.
1. Insert the gray Intelligent Key.
2. Turn the info button until the menu item "key menu" ap-
pears in the display.
3. Press the info button.
4. Remove the gray Intelligent Key and insert the yellow In-
telligent Key to be personalized.
5. Select the menu item to be changed by turning the info
button.
6. Press the info button.
7. Select the setting of the menu item by turning the info
button.
8. Confirm the setting by pressing the menu item.
9. Select the next menu item to be changed by turning the
info button.
10.After all settings have been made, call up the menu
"save" by turning the info button.
11.Press the info button.
The authorizations are saved.
Switch attachment kits on / off
1. Turn the info button until the desired attachment kit is
shown on the display.
2. Press the Info button.
3. Turn the info button until the desired function of the at-
tachment kit is selected.
4. Press the Info button.
Factory setting
The factory setting of all cleaning parameters is restored.
1. Turn the info button until the menu item "factory set-
tings" is displayed.
2. Press the info button.
3. Turn the info button until "yes" is highlighted.
4. Press the info button.
Set parameters for cleaning programs
All parameters for cleaning programs are retained until an-
other setting is selected.
1. Set the program switch to the desired cleaning program.
2. Press the info button.
The first adjustable parameter is displayed.
3. Press the info button
The set value flashes.
18
4. Set the desired value by turning the info button.
5. Confirm the changed setting by pressing the info button
or wait until the set value is automatically accepted after
10 seconds.
6. Select the next parameter by turning the info button.
7. After changing all desired parameters, turn the info but-
ton until the menu item "exit" is displayed.
8. Press the info button.
The menu is exited.
DANGER
Driving on slopes
Danger of injury
Observe the maximum permissible gradient when driving
the device on gradients for loading and unloading purpos-
es (see chapter "Technical data").
Drive slowly.
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during transportation.
1. With the D cleaning head installed, remove the disc
brushes from the brush head.
2. When transporting in vehicles, secure the device
against slipping and tipping over according to the appli-
cable guidelines.
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during storage.
ATTENTION
Frost
Destruction of the device through freezing water
Drain all water from the device.
Store the device in a frost-free location.
● This device may only be stored indoors.
● Fully charge the batteries before storing them for a long
period.
● Fully charge the batteries at least every month during

storage.

English

Transport

Storage