Daily Maintenance; Weekly Maintenance - EdilKamin IDROFLEXA Instalación Uso Y Mantenimiento

Ocultar thumbs Ver también para IDROFLEXA:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

maintenance
before performing any maintenance, disconnect the appliance from the mains.
failure to perform regular maintenance, at least on a SeaSonalbasis, could lead to poor functionality.
any problems resulting from lack of maintenance will immediately void the warranty.

daily maintenance

operations must be performed when the boiler-stove is off, cold and unplugged from the power supply
Cleaning should be carried out with the aid of a vacuum cleaner (see optional page. 23).
• the cleaning rodS (*) muSt be agitated once a day With the glove in eQuipment alSo fre-
Quen While the thermo-Stove iS in function) in order to alloW for fuel SavingS:
• Shake the cleaning bars located in the top front part, underneath the ceramic top (fig. 1).
• Open the door and remove and empty the ash pan (**) (fig. C).
• Remove the combustion chamber or use the spatula to scrape it and clean out any blocked holes on all sides.
• DO NOT EMPTY THE RESIDUE OUT INTO THE PELLET HOPPER.
• Remove the combustion chamber (1) and scrape with a spatula. Clean any obstructions in the apertures (fig. C).
• Suction the combustion chamber holder, clean the contact edges.
• Clean the glass, if necessary (when cold).
never vacuum hot aSh, it can make the vacuum cleaner breakdown and puts the household rooms at risk of fire
ATTENTION !!!
after implementing a normal cleaning procedure, incorrect coupling of the upper and lower combustion chambers can com-
promise the stove's performance. therefore, before igniting the stove, ensure that the combustion
chambers are correctly coupled as shown in.
*
*
*
*
fig. 1
fig. 2

WeeKly maintenance

• Involves cleaning the hearth (with a swab) once the ash pan has been removed (3 - fig. C).
• empty the pellet hopper and clean the base with the vacuum cleaner.
• Clean with the swabs (4 - fig. D), vacuum out the 3 pipes below (5 - fig. E)
• Clean out the combustion chamber and smoke extractor (6 - fig. E)
*
*
* *
fig. 3
fig. 4
NOTE:
upon reaching 2,500 hours of service of the stove, the display will show the writing 'Service eXpiration'.
the intervention of the technical assistance centre (tac) is necessary.
- 18
-

Publicidad

Tabla de contenido
loading

Tabla de contenido