Install The Wall Jamb And Side Lite Glass Panel - Kohler K-702010 Guia De Instalacion

#8-18 x 1-1/2" Screw
Bottom Side
Lite Bracket

3. Install the Wall Jamb and Side Lite Glass Panel

Install the Wall Jamb
- Locate and align the wall jamb on the bottom side lite bracket. Using a level, plumb the wall jamb and mark a
pencil line location against the wall.
- Using a 1/4" drill bit, drill holes using the pre punched holes located in the jamb as a guide. Insert anchors into
wall. Secure the wall jamb using four of the #8 18 x 1 1/2" screws provided.
Install the Side Lite Glass Panel
IMPORTANT! Make sure the inside of the bottom side lite bracket is free of debris before inserting the side lite
panel.
- Install the side lite panel pin and bushing into the top hole of the side lite glass panel.
- Align side lite panel pin with track in wall jamb and carefully slide panel into slot in the bottom side lite bracket.
- Press retaining pin into hole located on back of the bottom side lite bracket.
Kohler Co.
Anchor
Wall Jamb
Glass Door
Bottom
Side Lite
Bracket
Retaining Pin
(insert after installing glass)
5
Wall Jamb
Glass
Bushing
Side Lite
Panel Pin
Top View (Side Lite
Panel Pin Location)
Wall Jamb
Side Lite
Panel
Inside of Shower
1011451-2-
E