Maxon 297077-01 Instrucciones página 2

LIFT CORPORATION Sht. 2 of 10 DSG#
To prevent personal injury and equipment damage, make sure power is dis-
connected from Liftgate while installing electrical parts.
Remove all rings, watches and jewelry before doing any electrical work.
1. Turn OFF the master disconnect switch
at the pump box to disconnect battery
power from the hydraulic pumps. Refer
to BMR Operation Manual for detailed
instructions.
2. Position the in-cab switch (Kit item)
on a panel in the vehicle cab (FIG.
2-1). For mounting the switch, refer to
dimensions in FIGS. 2-2 and 2-3. Use
a 10 mm drill bit to drill mounting hole
for the switch.
© MAXON Lift Corp. 2020
WARNING
!
WARNING
!
IN-CAB SWITCH IN VEHICLE CAB
KNOB
15/16"
5/8"
IN-CAB SWITCH DIMENSIONS
5/16"
ON OFF
IN-CAB SWITCH DIMENSIONS
M-16-02
Rev. A Date: 08/03/20
FIG. 2-1
HEX NUT
PAL NUT
1-1/8"
(TOP VIEW)
FIG. 2-2
3/8"-32
BUSHING
(SIDE VIEW)
FIG. 2-3
CAB
IN-CAB
SWITCH
7/8"
1-9/32"
7/32"