Maxon 297077-01 Instrucciones página 5

LIFT CORPORATION Sht. 5 of 10 DSG#
12 GA WHITE WIRE
IN-CAB SWITCH
10. Turn ON the master disconnect switch at the
pump box to connect battery power from the
hydraulic pumps. Refer to BMR Operation
Manual for detailed instructions.
11. Pull the knob out to turn the switch
ON (FIG. 5-2). Liftgate should
operate with control switch. Push
the knob in to turn switch OFF.
Liftgate should not operate.
© MAXON Lift Corp. 2020
14 GA RED WIRE
CIRCUIT BREAKER
12 GA WHITE WIRE
CAB SWITCH CABLE
12 GA BLACK WIRE
CAB CUT-OFF SWITCH SCHEMATIC
M-16-02
12 GA BLACK WIRE
FIG. 5-1
KNOB
CONTROL KNOB
Rev. A Date: 08/03/20
MASTER
DISCONNECT
SWITCH
FIG. 5-2