Publicidad
O
x 8
P
Q
x 2
FIG. 7
7. Measure up 1/4" from the bottom of the Base (F) and mark for positioning of the Corner Brace (N).
Attach a Corner Brace to the Base and each Side with Screws (O). Insert Adjustable Glides (P)
into the Corner Braces.
Hammer Tack Glide (Q) into bottom edge of the Sides about one inch from the back.
R
x 8
S
x 8
FIG. 8A
8. Stand the unit upright. Determine where you want to locate the Adjustable Shelf (H). Tap the
Shelf Brackets (R) into the four holes with the flat side down. See FIGURE 8B. Insert the shelf
as shown. Secure the shelf to the unit using Screw (S) through the holes in the bottom of the
Shelf Bracket into the Shelf.
x 2
N
O
¼"
O
O
FIG. 8B
234W/235W — Page 7
P
Publicidad
