Operation - Bosch MW1-RX-Fx Manual De Uso

UHF Wireless Microphone System
6

Operation

1 Turn the receiver ON by pressing the POWER
button. The LCD screen will light up.
2 Turn the handheld microphone or belt-pack ON.
3 Check whether the receiver and microphone are
set to the same frequency. The RF signal indicator
shows that the microphone is within range.
4 Talk into the handheld or lavalier microphone.
When talking into the microphone the AF signal
level indicator on the receiver will be activated.
5 Adjust the receiver volume control until the
receiver output level matches the sensitivity of the
connected amplifier or mixer.
6 The wireless microphone is now ready for use.
7 Check the battery status indicator to verify if there
is sufficient battery power available.
When the wireless microphone is not in use anymore,
turn off the wireless handheld microphone and belt-
pack to conserve battery power.
Bosch Security Systems B.V.
en | 18
IUI-MW1-XXX | V2.0 | 2012.11