UHF Wireless Microphone System
7
Optional accessories
The dual rack adapter, front panel and antenna rack
adapter are included in one package and need to be
ordered separately under type number MW1-RMB.
7.1
Dual rack adapter
Slide the receiver in the rack adapter and position it
in such a way that the screw holes can be seen from
the bottom.
Fix the receiver to the rack adapter with the supplied
screws.
The rack adapter allows for mounting of one or two
receivers in a 19" rack.
figure 7.1: Dual rack adapter
7.2
Front panel
Fix the front panel to the empty position on the rack
adapter in case only one receiver is installed.
7.3
Antenna rack adapter
Mount the double sided panel connectors on the
front panel.
Fix the front panel to the rack adapter.
Connect the double sided panel connectors to the
receiver by using the supplied BNC cables.
Fix the antennas to the front panel.
7.4
Lavalier microphone
The lavalier microphone without the belt-pack can be
ordered separately under typenumber
MW1-LMC.
Bosch Security Systems B.V.
7.5
Head-worn microphone
The head-worn microphone can be used and
connected to the belt-pack transmitter
MW1-LTX-Fx.
figure 7.2: Head-worn microphone
The head-worn microphone can be ordered
separately under typenumber MW1-HMC.
en | 19
IUI-MW1-XXX | V2.0 | 2012.11