Tools And Materials; Before You Begin - Kohler K-304 Guia De Instalacion

Tools and Materials

Pipe Adjustable
Wrench Wrench
Assorted Plumbers
Screwdrivers Putty
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Before You Begin

CAUTION: Risk of product damage. The valve contains plastic
components. Do not apply excessive heat if you solder the valve
connections.
Observe all local plumbing and building codes.
The valve shuts off by water pressure. Do not force the handle in
any direction. To turn the valve off, gently turn it to the "Off"
position.
Flush all piping thoroughly before installing this valve.
Do not use plastic pipe between the valve and the spout. Use
1/2" nominal copper tube or 1/2" iron pipe.
Only connect a non-restricted flow spout to an uncapped spout
outlet. Do not connect restricted flow devices (such as
deck-mount spouts, bodysprays, or diverters) unless the shower
outlet on the valve is capped.
Install a pipe or tube in a straight drop of 7" (17.8 cm) to 18" (45.7
cm) with only one elbow between the valve and the
wall-mounted spout. Other types of installation may cause
unsatisfactory shower performance.
Kohler Co.
Hacksaw or Tubing Cutter
Strap
Wrench
PEX Crimp Tool
Thread
Sealant
Hex
Wrench Thermometer
3
Propane
Torch
Solder
114811-2-CG