Tools And Materials; Before You Begin - Kohler K-1095 Guia De Instalacion

Tools and Materials

Strap
Wrench
Thread Sealing
Compound

Before You Begin

IMPORTANT! The tape covering the sensor eyes must remain in
place when the valve is not installed.
For K-10959 New Installation Only
Install the fixture according to the manufacturer's instructions.
Install rough water supply piping according to the roughing-in
illustration.
Flush the supply piping in order to remove any debris from the
supply line.
Shut off the main water supply.
This atmospheric vacuum breaker shall not be subjected to a
continuous pressure for more than 12 hours.
The device shall be installed in accordance with the requirements
of the local plumbing code.
The device shall not be installed where the venting of water from
the device, during normal functioning, causes damage.
The device shall be installed downstream of the last valve.
For K-10964 Retrofit Installation Only
Turn off the water supply to the fixture prior to performing any
installation modifications.
Remove the existing flush valve according to the manufacturer's
instructions.
Correctly position the existing stop valve and vacuum breaker
prior to installing the new exposed electronic valve.
1061437-2-C
Blade
Hacksaw Screwdriver
2
Safety
Glasses
Kohler Co.