ENGLISH
To avoid the risk of electric shock, do not immerse
the cord, plug or motor unit in water or other liquid.
Features
1. On/off button
2. Motor housing
3. Jug cover
4. Chopping blade
5. Blade cover
6. Jug
7. Spout
8. Whisk
Unpacking
Remove all packaging from the appliance,
Clean the appliance before first use.
Use
Warning! Always place the appliance on a flat, clean and
non-slip surface before operating it.
Warning! Never operate the appliance unless the lid is
correctly fitted.
Remove the motor housing (2) and jug cover (3).
Fit the appropriate blade (4 or 8), add the ingredients
and replace the jug cover. Do not exceed the "max"
marking of the graduation on the jug.
Place the motor housing on top of the jug.
Press the button (1) to operate the appliance.
The Chopper will not operate if the jug cover (3) or the motor
housing (2) are incorrectly fitted.
The appliance will continue to work until the button is
released.
Disconnect the appliance from the electrical supply.
Remove the motor housing (2), jug cover (3) and blade
(4 or 8), then transfer the ingredients to a suitable
container.
Note: Do not operate the appliance for longer than two
minutes. After each two minute session, the appliance must
be allowed to cool down for at least five minutes.
The motor is equipped with an auto-resetting thermostat.
This may operate and stop the operation if the appliance is
overloaded. If this should happen, allow the chopper to cool
down and remove some of the contents of the jug. The
thermostat will take a few minutes to reset.
4
Quantities and processing times
Ingredient
Mayonnaise
Onions
Garlic
Bread
Nuts
Cheese
Ham
Meat (raw)
Chocolate
Cleaning and maintenance
Warning! Switch the appliance off and unplug it before
cleaning or maintenance.
Warning! Do not immerse the appliance, the cord set or the
plug in water or any other liquid.
Always clean the appliance immediately after use. Do not let
food dry on to the jug, cover or blades as this will make
cleaning difficult.
Do not wash any parts of the appliance in a dishwasher.
Jug
Wash the jug and jug cover by hand, rinse with clean
water and dry thoroughly.
Motor housing
Wipe the motor housing (2) with a damp cloth and dry
thoroughly. Do not use any abrasive or solvent-based
cleaner.
Blade assembly
Warning! Be careful when cleaning the blades; they are
sharp.
Wash the blades by hand, rinse with clean water and dry
thoroughly.
Processing
Quantity
time
(grams)
(seconds)
40
5
350
15
150
5
100
10
300
5
300
5
300
20
250
10
250
10