Mettler Toledo ACM500 Guia De Instalacion página 38

3.6.5. DeviceNet Connection
The DeviceNet option board (Figure 3-25) is connected to the network by a DeviceNet-specific
twisted pair cable. The cable is a 2 twisted pair, shielded cable Belden part number 3082a or
2083a. An equivalent cable can be used.
The pin numbering of the DeviceNet option board connector, wire colors and functions are detailed
in Table 3-9.
For any additional DeviceNet wiring information required, refer to ODVA documentation or the ODVA
web site at: http://www.odva.org/.
64061976 | 08 | 11/2019
Figure 3-24: RIO Connection
1 2 3 4 5
Figure 3-25: DeviceNet Option Board
Table 3-9: DeviceNet Signal Names
Pin Signal Name
1
2
3
4 Can_H
5
METTLER TOLEDO ACM500 Installation Manual
Wire Color
V - Black
Can_L Blue
Drain Shield
White
V + Red
3-19