Publicidad
Idiomas disponibles
Idiomas disponibles
Sprint Quick Operation Guide - Description of Parts and Controls of Equipment
The Sprint working table can present some configurations of command panels, varying
according to available instruments.
3
4
1
Instruments Contol Panel
1
2
4
5
6
1 -
Pneumatic Brake Valve*
2 -
Scaler Power Control
3 -
Electric Micromotor Speed Control
4 -
Electric Micromotor Rotation Direction Inverter
5 -
Optical Fiber On/Off
6 -
Scaler Water Control
7 -
Optical Fiber Water Control
3
2
1
Observe the Scheduled Review system for your equipment - Chapter 12 of the User Manual Dental Line.
5
1 -
Instruments Control Panel
2 -
Instruments Holder
3 -
Stainless Steel Tray
4 -
Bicarbonate Reservoir
5 -
X-ray Viewer
2
X-ray Command Panel
3
7
1 -
X-Ray Viewer
2 -
On/Off X-Rray Viewer
1 -
Instruments Holder
2 -
Venturi Saliva Ejector
3 -
Vortex Saliva Ejector
3
1
4
5
6
2
1
2
3
1 -
Cup Holder Manual Control
2 -
Spittoon Bowl Manual Control
3 -
Area for Instruments
4 -
Water Flow Register (when equipped with timer)
5 -
Spittoon Bowl Control with Timer
6 -
Cup Holder Control with Timer
To activate the water control in the Spitton Bowl, turn the
1
Spittoon Bowl Manual Control (2). To activate the manual water
control on the Cup Holder, keep the Cup Holder Manual
2
Control (1) pressed. When the Water Unit is equipped with
timed controls, use the Water Flow Register (4) to regulate the
water flow. To release timed water in the spitton bowl, press the
Spittoon Bowl Control with Timer (5), to release timed water in
the Cup Holder, press the Cup Holder Control with Timer (6). In
addition to being available on the side of the Water Unit, the
controls (5) and (6) may be available on the base control or on
the remote pedal.
The Straight Arm allows 5 manual height
adjustment levels.
To lower/raise the arm: holding the arm in the
part closest to the equipment column, pull it firmly
upward to disengage it. Adjust the lock (1) to the
desired height and then push the arm down until it
locks into place.
The Articulated Arm features 2 articulations
between the delivery unit and the working table
and mechanical lock system. It requires manual
adjustment by a handle (2) to adjust the height
from the floor.
The Flex Arm features 2 articulations (3) and
pneumatic lock that are disabled by activating the
pneumatic valve (4), allowing the
working table movement.
4
- Equipments made to last!
Page 02 - 5403132 - R04
Publicidad
