Omega Lift Equipment 60120 Manual De Instrucciones De Funcionamiento página 6

Assembly
Models 60123 & 60253: (Refer to Figure 5)
Note: Do not tighten any bolts unless told to do so.
1. Attach base legs (1) to upright channels (2) with bolts, lock washers and nuts (3). Hand tighten only.
2. Attach lower cross member (4) to upright channels (2) with bolts, lock washers and nuts (3).
3. Attach support links (5) to the base (1) and upright channels (2) with bolts, lock washers and nuts (3).
4. Carefully slide bed frame (6) down to lowest possible position between the upright channels (2).
5. Slide head plate (7) to into upper cross members (8). Then, secure with bolts (9).
6. Attach the upper cross members assembly (8) to the upright channels (2) with bolts, flat washers, lock washers
and nuts (10).
7. Thread the ram (11) to head plate (7) on upper cross members (8).
8. Attached pump support bracket (12) to upright channel (2) with three bolts, lock washers and nuts (3).
9. Tighten all aplicable nuts and bolt assemblies.
10. Place the hand pump (13) on pump support bracket (12).
11. To hold the pump, attach the fixed backets (14) and secure with bolts, lock washers and nuts (3).
12. Connect the male coupler end of hydraulic hose (15) to the female coupler of the ram (11) to complete the
connections.
13. Carefully bring the bed frame (6) up and secure it with pins (16).
14. Place the Arbor Plates (17) on Bed Frame (6).
15. When necessary, replace the saddle of ram (11)
with the bearing punch (18).
16. The press is now ready to use.
NOTICE: Before disassembly, carefully slide bed to its fully lowered position.
Model 60123
Size of Hardware Kits
3 bolt M10x25
lock washer M10
nut M10
9 bolt 10x25
10 bolt M16x115
flat washer M16
lock washer M16
nut M16
Model 60253
Size of Hardware Kits
3 bolt M10x25
lock washer M10
nut M10
9 bolt 10x25
10 bolt M16x150
flat washer M16
lock washer M16
nut M16
10
18
Qty
17
19
19
19
16
2
4
8
4
4
Qty
19
19
19
2
3
4
8
4
4
Figure 5 - Assembly Illustration for model 60123 & 60253
8
6
3
4
6
11
15
9
7
13
3
14
12
2
1
3
5