SpeeCo 580899 Instrucciones De Montaje Y Funcionamiento página 16

STEP 7:
Slide the tongue assembly (1) into the unit from the front. Insert the bolt (3) through the tongue and fasten with the
nylon lock nut (2).
K1626
STEP 8:
The main flywheel shield (1 & 2) comes in two halves. First, rotate the upper support bracket to an upright position and
securely fasten with the bolts (6) and centerlock nuts (7). Install the shield starting with the side opposite the engine.
Fasten shield to unit using the screws (5), flat washers (3) and lock washers (4). Securely tighten all hardware attach-
ing the shield.
SUPPORT
BRACKET
(Table removed to show detail.)
ITEM PART #
1 578705
2 BAG 580951
3 BAG 580951
K1628
ITEM PART #
1 581555
2 581695
3 BAG 580952
4 BAG 580952
5 BAG 580952
6 BAG 580952
7 BAG 580952
DESCRIPTION
TONGUE ASEMBLY
1/2-13UNC X 19/32, GR5 NYLOCK NUT
1/2-13 X 3-3/4, GR5 HEX BOLT
DESCRIPTION
RIGHT SHIELD
LEFT SHIELD
1/4, ZINC-PLT STL FLAT WASHER
1/4ID, ZINC-PLT STL LOCK WASHER
1/4-20 X 1-1/4 PHILIPS SCREW
1/4-20UNC X 1, GR5 HEX BOLT
1/4-20UNC X 7/32, GR2 CNTLOCK NUT 2
Page 12
QTY
1
1
1
QTY
1
1
8
8
8
2